简体版 繁體版 English
Identifiez-vous Créez un compte

Phrase priming coat

PhrasesPortable
  • After this, Leonardo added a primer coat of lead white.
  • Ms . Pizarro said the trick was to apply a primer coat of lotion.
  • You might need to strip the wallpaper off or cover it with a primer coat.
  • Most manufacturers leave the interior wood unfinished; exterior wood might come with a primer coat.
  • It is used chiefly in the priming coat and as a base for some red paints.
  • Then it will be sandblasted and painted with a primer coat and an industrial-quality finish coat.
  • The Chinese sought this mammal's fur due to its great commercial value and its'prime coat'all year long.
  • Apply a prime coat of latex enamel undercoater, finish with two coats of a semigloss latex enamel.
  • Apply a prime coat of a stain-killing sealer first, then apply two coats of the paint you prefer.
  • That gray is a prime coat.
  • The priming coat is a thin coat of white lead, red lead and driers mixed with linseed oil and turpentine.
  • A prime coat is a low viscosity asphalt that is applied to the base course prior to laying the HMA surface course.
  • Areas previously painted with oil-based paint can be repainted with latex paint, but a primer coat must be applied first, Kauflin said.
  • Inside the second church they joined congregants from both churches in putting up dry wall and primer coat around the altar area.
  • Additionally, paint with low white lead levels was applied as a thin primer coat to some pre-fabricated domestic wooden windows until the early 1980s.
  • The paint was first applied by the primer coat ( which is made up of black application ), followed by a layer of metallic silver.
  • McEnroe said, explaining that for badly chalking surfaces it was necessary to use a primer coat of a product the company manufactures called EasyMix E-B EmulsaBond.
  • A typical organic coil coating line consists of decoilers, entry strip accumulator, cleaning, chemical pretreatment, primer coat application, curing, final coat application, curing, exit accumulator and recoilers.
  • Apply a prime coat of a stain-killing sealer such as Kilz or BIN, and when this dries apply two coats of a good semi-gloss alkyd enamel, sanding lightly between coats.
  • "Lyd " was first steamed on 2 May 2010 during Ffestiniog's " Quirks and Curiosities " event . " Lyd " was repainted into a primer coat black in July 2010.
  • Plus d'exemples:  1  2